Usenet 1993 July

home *** CD-ROM | disk | FTP | other *** search

/ Usenet 1993 July / InfoMagic USENET CD-ROM July 1993.ISO / sources / misc / volume16 / ecu3 / part25 < prev next >

Wrap

Internet Message Format | 1991-01-06 | 46.8 KB

From: wht@n4hgf.uucp (Warren Tucker) Newsgroups: comp.sources.misc Subject: v16i049: ECU async comm package rev 3.0, Part25/35 Message-ID: <1991Jan6.052614.28597@sparky.IMD.Sterling.COM> Date: 6 Jan 91 05:26:14 GMT Approved: kent@sparky.imd.sterling.com X-Checksum-Snefru: 64f51fb2 14f99cca c1ceeb4e a19b2ae7 Submitted-by: wht@n4hgf.uucp (Warren Tucker) Posting-number: Volume 16, Issue 49 Archive-name: ecu3/part25 ---- Cut Here and feed the following to sh ---- #!/bin/sh # This is part 25 of ecu3 if touch 2>&1 | fgrep 'amc' > /dev/null then TOUCH=touch else TOUCH=true fi # ============= gendial/gendial.c ============== if test ! -d 'gendial'; then echo 'x - creating directory gendial' mkdir 'gendial' fi echo 'x - extracting gendial/gendial.c (Text)' sed 's/^X//' << 'SHAR_EOF' > 'gendial/gendial.c' && X/* CHK=0xC086 */ Xchar *revision = "x1.01"; X/*+------------------------------------------------------------------------- X gendial.c - SCO UUCP dialer program device independent portion X wht@n4hgf.Mt-Park.GA.US X X Configuration symbols: X HDUU defined if HDB UUCP used on system, else old Version 2 X X Defined functions: X RCE_text(value) X SIGALRM_alert(sig) X _lputc(lchar) X _lputc_paced(pace_msec,lchar) X _lputs(string) X _lputs_paced(pace_msec,string) X _lread(rtime,error_ok) X call_ungetty(call_type) X cleanup(stat) X decode_phone_number(userphno,result,resultlen) X dial_abort(sig) X display_termio(ttt,text) X get_uucp_uid() X instr(s1,s2) X lflush() X lread(rtime) X lread_ignore(rtime) X ltoggleDTR(msec) X lwrite(str) X main(argc,argv) X make_printable(ch) X myexit(code) X open_dce() X translate(ttab,str) X X Usage: dial ttyname telnumber speed X dial -h ttyname speed X X ttyname may be of style "ttyxx" or "/dev/ttyxx" (this is not standard) X X Returns: X 0x80 bit = 1 if connection failed X 0x10 bit = 1 if line is also used for dialin #if !defined(OLDUUCP) X 0x0f if msb=1: error code X if msb=0: connected baud rate (0=same as dialed baud) X Note: this dialer always returns 0 in the low nibble X since cu and uucp expect it X X Note: getty calls the dialer with -h whenever it starts up on a line X enabled in /etc/ttys and listed in Devices with this dialer. X X Error codes are split into two categories: X X 1) (codes 0-11) Local problems are defined as tty port, or DCE X problems: problems that can be worked around by using a different X device. X X 2) (codes 12-15) Remote problems are phone busy, no answer, etc.: X attempt to connect to this remote system should be stopped. X X Note: This dialer can be used both for the old "Version 2" X new HoneyDanBer UUCP. In HDB, uugetty is used and ungetty is not X necessary. Define HDUU for HDB UUCP. X X Note: This version of the dialer will NOT display the telephone number X on the console unless the actual uid is root. If dial logging is X used, make sure the dial_ttyXX.log file is precreated, owned by root X and has -rw--w--w- mode (0622). Now, if uucico would just suppress X username and password information it sends out! X X--------------------------------------------------------------------------*/ X/*+:EDITS:*/ X/*:07-19-1990-17:14-root@n4hgf-modify lread fata timeout handler */ X/*:05-26-1990-02:15-wht@n4hgf-creation */ X X#include "dialer.h" X X/* must be defined by device dependent module */ Xextern long DCE_DTR_low_msec; /* msecs DTR must be low to be recognized */ Xextern long DCE_DTR_high_msec; /* msecs for DCE to recover */ Xextern long DCE_write_pace_msec; /* msecs between chars written to DCE */ Xextern DCE_RESULT DCE_results[]; /* DCE result codes */ Xextern char *DCE_name; /* name of DCE */ Xextern char *DCE_revision; /* DCE-dependent code revision */ Xextern short DCE_hangup_CBAUD; /* BXXX DCE hangup baud rate or zero */ X X/* globals available to device dependent module */ Xint gargc; /* global copy of main's argv */ Xchar **gargv; /* global copy of main's argv */ Xchar *dce_name; /* full pathname of ACU device */ Xchar *telno = (char *)0; /* phone number if dial type request */ Xstruct termio dce_termio; /* last termio for device */ Xint Debug = DBG; /* set per -x flag */ Xint dialing = 0; /* set while dialing in progress */ Xint fddce = -1; /* file descriptor for dce_name */ Xint DialerExitCode = RC_FAIL; /* return code */ Xint status = 0; /* set on errors */ Xint hangup_flag = 0; /* set when DCE being hung up */ Xint hiCBAUD; /* highest permissible baud rate */ Xint loCBAUD; /* lowest permissible baud rate */ Xint uid; /* user id of executor */ Xint uid_uucp; /* user id of uucp */ Xint secure = 0; /* non-zero to suppress display of secure X * DCE traffic X */ X Xunsigned char dialer_codes[26]; /* A-Z embedded phone number codes */ X Xjmp_buf SIGALRM_alert_jmpbuf; XDCE_RESULT *last_result; X X/*+------------------------------------------------------------------------- X get_uucp_uid() X--------------------------------------------------------------------------*/ Xint Xget_uucp_uid() X{ Xstruct passwd *p = getpwnam("uucp"); X endpwent(); X if(p) X return(p->pw_uid); X else X return(-1); X} /* end of get_uucp_uid */ X X/*+------------------------------------------------------------------------- X instr(s1,s2) X X find s2 in s1; returns 1 if found, 0 if not found X--------------------------------------------------------------------------*/ Xinstr(s1,s2) Xregister char *s1; Xchar *s2; X{ X register len = strlen(s2); X while(s1 = strchr(s1,*s2)) X { X if(!strncmp(s2,s1,len)) X return(1); X s1++; X } X return(0); X} /* end of instr */ X X/*+------------------------------------------------------------------------- X translate(ttab,str) X X translate the pairs of characters present in the first string X whenever the first of the pair appears in the second string X (this routine from standard SCO dialer code) X--------------------------------------------------------------------------*/ Xvoid Xtranslate(ttab,str) Xregister char *ttab; Xchar *str; X{ X register char *cptr; X X while(*ttab && *(ttab + 1)) X { X for(cptr = str; *cptr; cptr++) X { X if(*ttab == *cptr) X *cptr = *(ttab + 1); X } X ttab += 2; X } X} /* end of translate */ X X/*+------------------------------------------------------------------------- X decode_phone_number(userphno,result,resultlen) X Xdecode user flags in phone number, returning phone number in Xresult, character flags in global dialer_codes[], 'A' or 'a' Xresults in dialer_codes[0] being 1, etc. Only letter codes are Xextracted. X XFor example, if userphno contains "123,D45f", result returned X"123,45" and only elements 3 and 5 of dialer_codes set to 1 X XFunction returns 0 if successful, -1 if result buffer too small X--------------------------------------------------------------------------*/ Xint Xdecode_phone_number(userphno,result,resultlen) Xregister char *userphno; Xregister char *result; Xint resultlen; X{ Xregister itmp; X X for(itmp = 0; itmp < sizeof(dialer_codes); itmp++) X dialer_codes[itmp] = 0; X X if(!resultlen) X return(-1); X resultlen--; /* leave room for null */ X X while(*userphno) X { X if(isalpha(*userphno)) X dialer_codes[*userphno - ((isupper(*userphno)) ? 'A' : 'a')] = 1; X else X { X if(!resultlen--) X return(-1); X *result++ = *userphno; X } X userphno++; X } X *result = 0; X return(0); X} /* end of decode_phone_number */ X X/*+------------------------------------------------------------------------- X make_printable(ch) - make a character "printable" X--------------------------------------------------------------------------*/ Xchar * Xmake_printable(ch) Xunsigned char ch; X{ Xstatic char buffer[10]; Xchar *cptr; X#define to_print(x) ((x)<' '?((x)+'@'):'?') X X cptr = buffer; X /* if not root or uucp and info needs securing */ X if(uid && (uid != uid_uucp) && secure) X { X *cptr++ = '?'; /* hide it */ X *cptr = 0; X return(buffer); X } X X if(iscntrl(ch) || !isprint(ch)) X { X if(!isascii(ch)) X { /* Top bit is set */ X *cptr++ = 'M'; X *cptr++ = '-'; X ch = toascii(ch); /* Strip it */ X } X if(iscntrl(ch)) X { X *cptr++ = '^'; X ch = to_print(ch); /* Make it printable */ X } X } X *cptr++ = ch; X *cptr = 0; X return(buffer); X} /* end of make_printable */ X X/*+------------------------------------------------------------------------- X RCE_text(value) X--------------------------------------------------------------------------*/ Xchar * XRCE_text(value) Xint value; X{ Xstatic char errant[32]; X X switch(value & 0x0F) X { X case RCE_NULL: return("unknown or unclassified error"); X case RCE_INUSE: return("line in use"); X case RCE_SIG: return("killed with signal"); X case RCE_ARGS: return("invalid arguments"); X case RCE_PHNO: return("invalid phone number"); X case RCE_SPEED: return("invalid line speed or bad connect speed"); X case RCE_OPEN: return("cannot open line"); X case RCE_IOCTL: return("ioctl error"); X case RCE_TIMOUT: return("timeout"); X case RCE_NOTONE: return("NO DIAL TONE"); X case RCE_HANGUP: return("hangup failed\n"); X case RCE_NORESP: return("DCE didn't respond.\n"); X case RCE_BUSY: return("BUSY"); X case RCE_NOCARR: return("NO CARRIER"); X case RCE_ANSWER: return("NO ANSWER"); X } X sprintf(errant,"code 0x%04x",value); X return(errant); X X} /* end of RCE_text */ X X/*+------------------------------------------------------------------------- X myexit(code) - all threads exit() thru here X--------------------------------------------------------------------------*/ Xvoid Xmyexit(code) Xint code; X{ X if(dialing) X { X if(code & RC_FAIL) X { X DEBUG(1,"dial failed: %s\n",RCE_text(code)); X } X else X { X DEBUG(1,"dial succeeded\n",0); X } X } X DCE_exit(code); /* should not return */ X exit(code); /* in case it does */ X X} /* end of myexit */ X X/*+------------------------------------------------------------------------- X dial_abort(sig) X--------------------------------------------------------------------------*/ Xdial_abort(sig) Xint sig; X{ X if(sig) X { X DEBUG(2,"\ndialer received signal %d\n\n",sig); X } X else X { X DEBUG(2,"\ndialer aborted, fail status = %d\n",DialerExitCode); X } X DCE_abort(sig); X if(fddce != -1) X { X ioctl(fddce,TCGETA,&dce_termio); X dce_termio.c_cflag |= HUPCL; /* make sure DCE hangs up */ X ioctl(fddce,TCSETA,&dce_termio); X close(fddce); X } X if(sig) X DialerExitCode |= (RC_FAIL | RCE_SIG); X myexit(DialerExitCode); X} /* end of dial_abort */ X X/*+------------------------------------------------------------------------- X cleanup(stat) - close device and exit X--------------------------------------------------------------------------*/ Xvoid Xcleanup(stat) Xint stat; X{ X if(stat & RC_FAIL) X { /* if we failed, drop DTR (in dial_abort) */ X DialerExitCode = stat; X dial_abort(0); X } X else X myexit(stat); X} /* end of cleanup */ X X/*+------------------------------------------------------------------------- X SIGALRM_alert(sig) - catch alarm call and do longjmp X--------------------------------------------------------------------------*/ XSIGALRM_alert(sig) Xint sig; X{ X longjmp(SIGALRM_alert_jmpbuf,1); X} /* end of SIGALRM_alert */ X X/*+------------------------------------------------------------------------- X _lread(rtime,error_ok) X X Common code for lread() and lread_ignore() X X Returns DCE_RESULT->code from matching DCE_RESULT->result X or if no match is found and the first digit of the modem X response is numeric, the the numeric value is returned ored X with 0x4000. X X If error_ok is true and a timeout occurs, -1 is returned. X If error_ok is false and a timeout occurs, X cleanup(RC_FAIL | RCE_TIMOUT | DialerExitCode); X is called, which results in dial_abort(0) thus DCE_abort(0) X being called. X--------------------------------------------------------------------------*/ Xlong X_lread(rtime,error_ok) Xint rtime; Xint error_ok; X{ Xint itmp; Xchar rdchar; XDCE_RESULT *mr; Xchar buf[MAXLINE]; Xregister char *bp = buf; Xchar *cptr; X X if(error_ok) X { X signal(SIGALRM,SIGALRM_alert); X if(setjmp(SIGALRM_alert_jmpbuf) != 0) X { X DEBUG(6,">>-%s\n","TIMEOUT (NON-FATAL)"); X return(-1); X } X } X else X { X signal(SIGALRM,SIGALRM_alert); X if(setjmp(SIGALRM_alert_jmpbuf) != 0) X { X DEBUG(6,">>-%s\n","TIMEOUT (FATAL)"); X cleanup(RC_FAIL | RCE_TIMOUT | DialerExitCode); X } X } X X alarm(rtime); X DEBUG(6,"DCE returned %s","<<"); X X while((itmp = read(fddce,&rdchar,1)) == 1) X { X *bp++ = (rdchar &= 0x7F); X DEBUG(6,"%s",make_printable(rdchar)); X if(rdchar == 0x0A) X DEBUG(6,"\n",0); X if(bp >= buf + MAXLINE) X { X alarm(0); X DEBUG(6,"\n>>-FAIL (%s)\n","BUFFER OVERFLOW"); X myexit(RC_FAIL | RCE_NULL); X } X *bp = 0; X if(rdchar == '\r') X { X cptr = buf; X if(*cptr == 0x0A) X cptr++; X for(mr = DCE_results; mr->result; ++mr) X { X if(instr(buf,mr->result)) X { X alarm(0); X DEBUG(6,">>-%s\n","SUCCESS"); X DEBUG(4,"got %s\n",mr->result); X last_result = mr; X return(mr->code); X } X } X X if(isdigit(*cptr)) X { X alarm(0); X itmp = atoi(cptr); X DEBUG(6,">>-SUCCESS (NUMERIC RESULT %d)\n",itmp); X return(rfNumeric | itmp); X } X X bp = buf; X } X } X X alarm(0); X if(Debug >= 6) X { X ff(se,">>-FAIL (%s %d)", X (itmp < 0) ? "READ ERRNO" : "READ LENGTH", X (itmp < 0) ? errno : 0); X } X DEBUG(4," incomplete or no response\n",0); X return(-1); X} /* end of _lread */ X X/*+------------------------------------------------------------------------- X lread_ignore(rtime) X X Reads from the ACU until it finds a valid response (found in X DCE_results), a numeric result code (e.g., S-register value), or times X out after rtime seconds. The numeric response feature is designed X for Hayes-style DCEs and may not be useful for other DCE types X X Returns: DCE_RESULT code, numeric result + 128, or -1 on timeout or error X--------------------------------------------------------------------------*/ Xlong Xlread_ignore(rtime) Xint rtime; X{ X return(_lread(rtime,1)); X} /* end of lread_ignore */ X X/*+------------------------------------------------------------------------- X lread(rtime) X X Same as lread_ignore, but does not return on timeout or error X--------------------------------------------------------------------------*/ Xlong Xlread(rtime) Xint rtime; X{ Xint rtn = _lread(rtime,0); X if(rtn < 0) X myexit(RC_FAIL | RCE_TIMOUT); X return(rtn); X} /* end of lread */ X X/*+------------------------------------------------------------------------- X lflush() - flushes input clists for DCE X--------------------------------------------------------------------------*/ Xlflush() X{ X ioctl(fddce,TCFLSH,0); X} /* end of lflush */ X X/*+----------------------------------------------------------------------- X _lputc(lchar) -- write char to comm line X------------------------------------------------------------------------*/ Xvoid X_lputc(lchar) Xchar lchar; X{ X write(fddce,&lchar,1); X DEBUG(6,"%s",make_printable(lchar)); X} /* end of _lputc */ X X/*+----------------------------------------------------------------------- X _lputc_paced(pace_msec,lchar) -- write char to comm line with pacing X------------------------------------------------------------------------*/ Xvoid X_lputc_paced(pace_msec,lchar) Xregister long pace_msec; Xregister char lchar; X{ X _lputc(lchar); X if(pace_msec) X nap(pace_msec); X} /* end of _lputc_paced */ X X/*+----------------------------------------------------------------------- X _lputs(string) -- write string to comm line X------------------------------------------------------------------------*/ Xvoid X_lputs(string) Xregister char *string; X{ X while(*string) X _lputc(*string++); X} X X/*+----------------------------------------------------------------------- X _lputs_paced(pace_msec,string) -- write string to comm line X with time between each character X------------------------------------------------------------------------*/ Xvoid X_lputs_paced(pace_msec,string) Xregister long pace_msec; Xregister char *string; X{ X while(*string) X _lputc_paced(pace_msec,*string++); X X} /* end of _lputs_paced */ X X/*+------------------------------------------------------------------------- X lwrite(str) - output string to dce_name X Returns: 0 on completion, -1 on write errors. X--------------------------------------------------------------------------*/ Xlwrite(str) Xregister char *str; X{ Xint err; X X nap(200L); X DEBUG(6,"Sent DCE %s","<<"); X _lputs_paced(DCE_write_pace_msec,str); X DEBUG(6,">>-%s\n","SUCCESS"); X ioctl(fddce,TCSETAW,&dce_termio); /* wait for I/O to drain */ X return(0); X X} /* end of lwrite */ X X/*+------------------------------------------------------------------------- X ltoggleDTR(msec) - drop DTR, pause, raise DTR X XIf msec != 0, drop DTR for that period of time, else DCE_DTR_low_msec XThis routine trusts that the DTE has already been opened and ioctl'ed Xonce and that no error checking need be done; this may not catch all Xchanges in the universe, but the assumption is not naive X--------------------------------------------------------------------------*/ XltoggleDTR(msec) Xlong msec; X{ X dce_termio.c_cflag &= ~(CBAUD); /* set to B0 */ X dce_termio.c_cflag |= HUPCL; X ioctl(fddce,TCSETA,&dce_termio); X close(fddce); X nap((msec) ? msec : (long)DCE_DTR_low_msec); X (void)open_dce(); X if(DCE_DTR_high_msec) X nap((long)DCE_DTR_high_msec); X} /* end of ltoggleDTR */ X X/*+------------------------------------------------------------------------- X call_ungetty(call_type) X Xtype: 'a' - acquire dce_name X 't' - test to see if dce_name should be returned X 'r' - return dce_name X XThis function is a no-op in HDB UUCP versions X--------------------------------------------------------------------------*/ Xcall_ungetty(call_type) Xchar call_type; X{ X#if defined(HDUU) X switch(call_type) X { X case 'a': return(UG_NOTENAB); /* simulate complete success */ X case 't': return(UG_RESTART); /* simulate need for re-setup */ X case 'r': return(0); /* simulate complete success */ X } X return(0); X#else /* HDUU */ Xint itmp; Xint pid; Xunsigned int wait_status; Xstatic char *ungetty = "/usr/lib/uucp/ungetty"; X X if((pid = fork()) == 0) X { X if(Debug >= 5) X ff(se,"%s: %s %s called\n",*gargv,ungetty,dce_name); X switch(call_type) X { X case 'a': X execl(ungetty,"ungetty",dce_name + 5,(char *)0); X break; X case 't': X execl(ungetty,"ungetty","-t",dce_name + 5,(char *)0); X break; X case 'r': X execl(ungetty,"ungetty","-r",dce_name + 5,(char *)0); X break; X } X ff(se,"%s exec error %d (%s)\n",ungetty,errno,sys_errlist[errno]); X __exit(-1); X } X X while(((itmp = wait(&wait_status)) != pid) && itmp != -1) X ; X X if(Debug >= 6) X ff(se,"%s pid %d exit status 0x%04x\n",ungetty,itmp,wait_status); X X return((wait_status >> 8) & 0xFF); X#endif /* HDUU */ X} /* end of call_ungetty */ X X/*+----------------------------------------------------------------------- X display_termio(ttt) X display termio 'ttt' on se X------------------------------------------------------------------------*/ Xvoid Xdisplay_termio(ttt,text) Xstruct termio *ttt; Xchar *text; X{ Xregister flag; Xregister i_cc; Xregister char *cptr; Xint dbits; Xchar parity; X X ff(se,"----->> %s\n",text); X X flag = ttt->c_iflag; X ff(se, X"iflag: %07o IGNBRK:%d BRKINT:%d IGNPAR:%d PARMRK:%d INPCK:%d ISTRIP:%d\n", X flag, X (flag & IGNBRK) ? 1 : 0, X (flag & BRKINT) ? 1 : 0, X (flag & IGNPAR) ? 1 : 0, X (flag & PARMRK) ? 1 : 0, X (flag & INPCK ) ? 1 : 0, X (flag & ISTRIP) ? 1 : 0); X ff(se, X" INLCR:%d IGNCR:%d ICRNL:%d IUCLC:%d IXON:%d IXANY:%d IXOFF:%d\n", X (flag & INLCR ) ? 1 : 0, X (flag & IGNCR ) ? 1 : 0, X (flag & ICRNL ) ? 1 : 0, X (flag & IUCLC ) ? 1 : 0, X (flag & IXON ) ? 1 : 0, X (flag & IXANY ) ? 1 : 0, X (flag & IXOFF ) ? 1 : 0); X X flag = ttt->c_oflag; X ff(se, X"oflag: %07o OPOST:%d OLCUC:%d ONLCR:%d OCRNL:%d ONOCR:%d ONLRET:%d OFDEL:%d\n", X flag, X (flag & OPOST ) ? 1 : 0, X (flag & OLCUC ) ? 1 : 0, X (flag & ONLCR ) ? 1 : 0, X (flag & OCRNL ) ? 1 : 0, X (flag & ONOCR ) ? 1 : 0, X (flag & ONLRET) ? 1 : 0, X (flag & OFDEL ) ? 1 : 0); X X flag = ttt->c_cflag; X ff(se,"cflag: %07o ",ttt->c_cflag); X switch(flag & CBAUD) X { X case B0: cptr = "HUP"; break; X case B50: cptr = "50"; break; X case B75: cptr = "75"; break; X case B110: cptr = "110"; break; X case B134: cptr = "134.5"; break; X case B150: cptr = "150"; break; X case B200: cptr = "200"; break; X case B300: cptr = "300"; break; X case B600: cptr = "600"; break; X case B1200: cptr = "1200"; break; X case B1800: cptr = "1800"; break; X case B2400: cptr = "2400"; break; X case B4800: cptr = "4800"; break; X case B9600: cptr = "9600"; break; X case EXTA: cptr = "EXTA(19200?)"; break; X case EXTB: cptr = "EXTB(38400?)"; break; X default: cptr = "????"; break; X } X dbits = 5 + ((flag & CSIZE) >> 4); X parity = (flag & PARENB) ? ((flag & PARODD) ? 'O' : 'E') : 'N'; X ff(se,"%s-%d-%c-%d ",cptr,dbits,parity,(flag & CSTOPB) ? 2 : 1); X switch(flag & CS8) X { X case CS8: fputs("CS8 ",se); break; X case CS7: fputs("CS7 ",se); break; X case CS6: fputs("CS6 ",se); break; X case CS5: fputs("CS5 ",se); break; X } X ff(se,"CREAD:%d HUPCL:%d CLOCAL:%d", X (flag & CREAD ) ? 1 : 0, X (flag & HUPCL ) ? 1 : 0, X (flag & CLOCAL) ? 1 : 0); X#if defined(RTSFLOW) X ff(se," RTSFLOW:%d CTSFLOW:%d", X (flag & RTSFLOW ) ? 1 : 0, X (flag & CTSFLOW ) ? 1 : 0); X#endif X ff(se,"\n"); X X flag = ttt->c_lflag; X ff(se,"lflag: %07o ISIG:%d ICANON:%d XCASE:%d ECHO:%d ECHOE:%d\n", X flag, X (flag & ISIG ) ? 1 : 0, X (flag & ICANON) ? 1 : 0, X (flag & XCASE ) ? 1 : 0, X (flag & ECHO ) ? 1 : 0, X (flag & ECHOE ) ? 1 : 0); X ff(se," ECHOK:%d ECHONL:%d NOFLSH:%d XCLUDE:%d\n", X (flag & ECHOK ) ? 1 : 0, X (flag & ECHONL) ? 1 : 0, X (flag & NOFLSH) ? 1 : 0, X (flag & XCLUDE) ? 1 : 0); X X ff(se, X" INTR QUIT ERAS KILL EOF EOL EOL2 SWTCH VMIN==EOF VTIME==EOL\n"); X ff(se,"ctl chars: "); X for(i_cc = 0; i_cc < NCC; i_cc++) X ff(se,"%02x ",ttt->c_cc[i_cc]); X ff(se," (hex)\n"); X X} /* end of display_termio */ X X/*+------------------------------------------------------------------------- X open_dce() - open the dce_name (DCE) Xplugs global 'fddce' and returns fd of open DCE line X--------------------------------------------------------------------------*/ Xint Xopen_dce() X{ Xint fd1; Xint fd2; Xstatic int first_open = 1; /* true if first time ACU opened */ X X /* open with O_NDELAY set or the open probably will hang */ X if((fd1 = open(dce_name,O_RDWR | O_NDELAY)) < 0) X { X ff(se,"%s: Can't open device: %s\n",*gargv,dce_name); X myexit(RC_FAIL | RCE_OPEN | DialerExitCode); X } X X ioctl(fd1,TCGETA,&dce_termio); X dce_termio.c_oflag = 0; X dce_termio.c_iflag = 0; X dce_termio.c_cflag &= ~(CBAUD | HUPCL); X dce_termio.c_cflag |= CLOCAL | X ((hangup_flag) ? HUPCL : 0) | X ((hangup_flag && DCE_hangup_CBAUD) ? DCE_hangup_CBAUD : hiCBAUD); X dce_termio.c_lflag &= ~ECHO; X dce_termio.c_cc[VMIN] = 1; X dce_termio.c_cc[VTIME] = 0; X X if (Debug >= 10) X display_termio(&dce_termio,"setting line termio"); X X if(status = ioctl(fd1,TCSETA,&dce_termio)) X { X DEBUG(1,"%s: ioctl error on %s",dce_name); X DEBUG(1,"%s",dce_name); X DEBUG(1," errno=%d\n",errno); X cleanup(RC_FAIL | RCE_IOCTL | DialerExitCode); X } X X /* reopen line without O_NDELAY */ X fd2 = fd1; X if((fd1 = open(dce_name,O_RDWR)) < 0) X { X ff(se,"%s: Can't open device w/o O_NDELAY: %s\n",*gargv,dce_name); X myexit(RC_FAIL | RCE_OPEN | DialerExitCode); X } X close(fd2); X X ioctl(fd1,TCFLSH,2); /* flush any residue in clists */ X fddce = fd1; /* save fd in global */ X return(fd1); X X} /* end of open_dce */ X X/*+------------------------------------------------------------------------- X main(argc,argv) X--------------------------------------------------------------------------*/ Xmain(argc,argv) Xint argc; Xchar **argv; X{ Xint itmp; Xint unrecognized_switches = 0; Xchar *cptr; Xextern int optind; Xextern int opterr; Xextern char *optarg; X X setbuf(stderr,NULL); X setbuf(stdout,NULL); X X/* security considerations */ X uid = getuid(); X uid_uucp = get_uucp_uid(); X secure = 0; X X gargv = argv; X gargc = argc; X X signal(SIGILL,dial_abort); X signal(SIGIOT,dial_abort); X signal(SIGEMT,dial_abort); X signal(SIGFPE,dial_abort); X signal(SIGBUS,dial_abort); X signal(SIGSEGV,dial_abort); X signal(SIGSYS,dial_abort); X signal(SIGTERM,dial_abort); X signal(SIGINT,dial_abort); X X opterr = 0; X while((itmp = getopt(argc,argv,"hx:")) != EOF) X { X switch(itmp) X { X case 'h': X hangup_flag++; X break; X case 'x': X Debug = atoi(optarg); X break; X case '?': /* dialer-specific code may want to handle these */ X unrecognized_switches++; X break; X } X } X X/* announce who we are and our arguments if debugging */ X if(Debug > 1) X { X ff(se,"\ngeneric dialer %s (%s %s)\n",revision, X DCE_name,DCE_revision); X if(!uid) X { X ff(se,"(args "); X for(itmp = 0; itmp < argc; itmp++) X ff(se,"%s ",argv[itmp]); X fputs(")\n",se); X } X if(Debug >= 8) X ff(se,"uid = %d euid=%d\n",uid,geteuid()); X } X X chdir("/usr/spool/uucp"); /* in case of core dump */ X X /* give DCE-specific code a chance at the entire command line */ X if(status = DCE_argv_hook(argc,argv,optind,unrecognized_switches)) X { X DEBUG(1,"dialer failed: %s\n",RCE_text(status)); X exit(status); X } X X/* check argument count */ X if(hangup_flag) X { X if((argc - optind) != 2) X status++; X } X else if((argc - optind) != 3) X status++; X X/* die with usage if argument error */ X if(status) X { X if(hangup_flag) X ff(se,"Usage: %s -h devicename speed\n",argv[0]); X else X ff(se,"Usage: %s devicename number speed\n",argv[0]); X myexit(RC_FAIL | RCE_ARGS); X } X X/* if called with "ttyxx" style ttyname, convert to "/dev/ttyxx" */ X cptr = argv[optind++]; X if(!strncmp(cptr,"tty",3)) X { X char s32[32]; X strcpy(s32,"/dev/"); X strcat(s32,cptr); X dce_name = strdup(s32); X } X else X dce_name = cptr; X X/* save phone number */ X if(!hangup_flag) X telno = argv[optind++]; X X/* get baud rates (validated by DCE-dependent code) */ X loCBAUD = hiCBAUD = DCE_baud_to_CBAUD(atoi(argv[optind])); X if(cptr = strchr(argv[optind],'-')) X hiCBAUD = DCE_baud_to_CBAUD(atoi(++cptr)); X X (void)open_dce(); /* open the line */ X X/* H A N G U P R E Q U E S T */ X if(hangup_flag) X { X if(call_ungetty('t') != UG_RESTART) X cleanup(SUCCESS); X DCE_hangup(); X cleanup((call_ungetty('r')) ? RC_FAIL : SUCCESS ); X } X X/* D I A L R E Q U E S T */ X X switch(call_ungetty('a')) X { X case UG_NOTENAB: /* line acquired: not enabled */ X status = SUCCESS; X break; X case UG_ENAB: /* line acquired: need ungetty -r when done */ X status = RC_ENABLED; X break; X case UG_FAIL: /* could not acquire line */ X myexit(RC_FAIL | RCE_INUSE); X case 255: X myexit(RC_FAIL | RCE_NULL); X } X X dialing = 1; X if(!(status = DCE_dial(telno))) /* if dial succeeded ... */ X myexit(status); /* ... exit with good news */ X X /* dialling did not succeed */ X myexit(RC_FAIL | status); X} /* end of main */ X X/* end of gendial.c */ X/* vi: set tabstop=4 shiftwidth=4: */ SHAR_EOF $TOUCH -am 0831145790 'gendial/gendial.c' && chmod 0644 gendial/gendial.c || echo 'restore of gendial/gendial.c failed' Wc_c="`wc -c < 'gendial/gendial.c'`" test 25754 -eq "$Wc_c" || echo 'gendial/gendial.c: original size 25754, current size' "$Wc_c" # ============= gendial/dceT2500.c ============== echo 'x - extracting gendial/dceT2500.c (Text)' sed 's/^X//' << 'SHAR_EOF' > 'gendial/dceT2500.c' && X/* #define TRUSTING /* trust user has -z'd before use */ X#define WHT X/*+------------------------------------------------------------------------- X dceT2500.c - DCE-specific portion of generic SCO UUCP dialer X Driver for Telebit T2500 X wht@n4hgf.Mt-Park.GA.US X--------------------------------------------------------------------------*/ X/*+:EDITS:*/ X/*:11-29-1990-18:31-r@n4hgf-revision/1st releasable */ X/*:08-14-1990-20:40-wht@n4hgf-ecu3.00-flush old edit history */ X X#include "dialer.h" X X/* X * DCE_DTR_low_msec - milliseconds to hold DTR low to ensure DCE X * sees the transition; this value may be changed X * as necessary before each call to ltoggleDTR(), X * but, generally, a constant value will do. X */ Xlong DCE_DTR_low_msec = 500; X X/* X * DCE_DTR_high_msec - milliseconds DTR must remain high before the X * DCE may be expected to be ready to be commanded X */ Xlong DCE_DTR_high_msec = 500; X X/* X * DCE_write_pase_msec - milliseconds to pause between each character X * sent to the DCE (zero if streaming I/O is X * permitted); this value may be changed as X * necessary before each call to lwrite(), but, generally, a constant X * value will do. Note that this value is used to feed a value to nap(), X * which has a granularity of .010 seconds on UNIX/386, .020 on XENIX/286 X * and .050 seconds on XENIX/86. X */ Xlong DCE_write_pace_msec = 0; X X/* X * DCE_name - short name for DCE X * DCE_revision - revision number for this module X */ Xchar *DCE_name = "Telebit T2500"; Xchar *DCE_revision = "1.00"; X X/* X * DCE_hangup_CBAUD - baud rate to use for hanging up DCE X * and readying it for dial in access X * (BXXX mask); use a value of zero if the speed X * specified by the invoker is to be used. X * This value is useful for DCEs such as the early Hayes 2400 X * which are so unfortunately compatible with their 1200 predecessor X * that they refuse to answer at 2400 baud unless you last spoke to X * them at that rate. For such bad boys, use B2400 below. X */ Xint DCE_hangup_CBAUD = 0; X/* int DCE_hangup_CBAUD = B2400; */ X X/* X * DCE_results - a table of DCE response strings and a token X * code for each; when you call lread() or lread_ignore(), X * if the read routine detects one of the strings, X * the appropriate code is returned. If no string matches, then X * lread()/lread_ignore examines the DCE result string for a X * numeric value; if one is found, the numeric value or'd with X * 0x40000000 is returned (in this way, e.g., you can read "modem X * S registers"). If nothing agrees with this search, lread() X * will abort the program with RC|FAIL|RCE_TIMOUT, lread_ignore() X * will return -1. You may use any value between 0 and 0x3FFFFFFF. X * This module is the only consumer of the codes, although they X * are decoded by gendial.c's _lread() X */ X X/* flag bits */ X#define rfConnect 0x00800000 X#define rfREL 0x00400000 X#define rfFAST 0x00200000 X#define rfV32 0x00100000 X#define rfMASK 0x0000FFFF /* mask off rfBits */ X X/* unique codes */ X#define rOk 0 X#define rNoCarrier 1 X#define rError 2 X#define rNoDialTone 3 X#define rBusy 4 X#define rNoAnswer 5 X#define rRring 6 X#define rConnect300 ( 300 | rfConnect) X#define rConnect1200 ( 1200 | rfConnect) X#define rConnect2400 ( 1200 | rfConnect) X#define rConnect300R ( 300 | rfConnect | rfREL) X#define rConnect1200R ( 1200 | rfConnect | rfREL) X#define rConnect2400R ( 2400 | rfConnect | rfREL) X#define rConnectFASTK (19200 | rfConnect | rfFAST) /* may be 9600 */ X#define rConnectFASTX (19200 | rfConnect | rfFAST) X#define rConnectFASTU (19200 | rfConnect | rfFAST) X#define rConnectFAST (19200 | rfConnect | rfFAST) X#define rConnect9600 ( 9600 | rfConnect | rfV32) X XDCE_RESULT DCE_results[] = X{ X { "OK", rOk, }, X { "NO CARRIER", rNoCarrier, }, X { "ERROR", rError }, X { "NO DIALTONE", rNoDialTone, }, X { "BUSY", rBusy }, X { "NO ANSWER", rNoAnswer }, X { "RRING", rRring }, X { "CONNECT 300/REL", rConnect300R }, X { "CONNECT 1200/REL", rConnect1200R }, X { "CONNECT 2400/REL", rConnect2400R }, X { "CONNECT 300", rConnect300 }, X { "CONNECT 1200", rConnect1200 }, X { "CONNECT 2400", rConnect2400 }, X { "CONNECT FAST/KERM", rConnectFASTK }, X { "CONNECT FAST/XMDM", rConnectFASTX }, X { "CONNECT FAST/UUCP", rConnectFASTU }, X { "CONNECT FAST", rConnectFAST }, X { "CONNECT 9600", rConnect9600 }, X { (char *)0, -1 } /* end table */ X}; X X/*+------------------------------------------------------------------------- X DCE_baud_to_CBAUD(baud) - check for valid baud rates supported by DCE X X DCE dependent function must validate baud rates supported by DCE X returns baud rate in struct termio c_cflag fashion X or terminates program with error X--------------------------------------------------------------------------*/ Xint XDCE_baud_to_CBAUD(baud) Xunsigned int baud; X{ X switch(baud) X { X case 110: return(B110); X case 300: return(B300); X case 1200: return(B1200); X case 2400: return(B2400); X case 9600: return(B9600); X X#if defined(B19200) X case 19200: return(B19200); X#else X#ifdef EXTA X case 19200: return(EXTA); X#endif X#endif X X#if defined(B38400) X case 38400: return(B38400); X#else X#ifdef EXTB X case 38400: return(EXTB); X#endif X#endif X X } X myexit(RC_FAIL | RCE_SPEED); X} /* end of DCE_baud_to_CBAUD */ X X/*+------------------------------------------------------------------------- X sync_Telebit() - sync modem with our DTE speed X--------------------------------------------------------------------------*/ Xvoid Xsync_Telebit() X{ Xregister int maxretry = 8; Xregister int count; Xunsigned char rdchar; X X while(maxretry--) X { X lflush(); X write(fddce,"a",1); X count = 5; X while(count) /* wait 50-200 msec for character, depending on HZ */ X { X if(rdchk(fddce)) X break; X nap(20L); X count--; X } X if(count && (read(fddce,&rdchar,1) == 1) && (rdchar == 'a')) X return; X } X X DEBUG(1,"Telebit SYNC FAILED\n",0); X myexit(RC_FAIL | RCE_TIMOUT); X X} /* end of sync_Telebit */ X X/*+------------------------------------------------------------------------- X init_T2500() - init T2500 from scratch, assuming nothing X X reset to factory defaults, then set X E0 no local echo in command mode X F1 no local echo in data transfer mode X M0 speaker off X Q4 generate reult codes, but not RING X V1 verbal result codes X X3 extended result codes X S0=1 answer on first ring X S2=1 escape to unusual value X S11=50 50 msec DTMF timing X S45=1 enable remote access X S48=1 all 8 bits are significant X S50=0 use automatic connect speed determination X S51=252 set serial port baud rate automatically (no typeahead) X S52=2 go on hook when dtr drops and reset to NV-RAM X S53=1 DCD signal follows remote carrier, DSR on when modem ready X S54=3 pass BREAK signal to remote modem X S55=0 respond to command escape sequence X S58=2 DTE uses CTS/RTS flow control. X S64=1 ignore characters sent by DTE while answering X S66=0 don't lock interface speed, just go with the flow. X S68=255 DCE uses whatever flow control DTE uses X S92=1 PEP tones at the end of answer sequence X S95=0 no MNP X S110=255 use data compression when the remote modem requests it. X S111=255 accept any protocol X write to nonvolatile RAM X--------------------------------------------------------------------------*/ Xvoid Xinit_T2500() X{ Xregister itmp; Xint maxretry = 4; Xchar *init0 = "AT&FE0F1M0Q4V1X3\r"; Xchar *init1 = "ATS0=1S2=1S11=50S45=1S48=1S50=0S51=252S52=2S53=1S54=3\r"; Xchar *init2 = "ATS55=0S58=2S64=1S66=0S68=255S92=1S95=0S110=255S111=255&W\r"; X X DEBUG(7,"INITIALIZING %s\n",dce_name); X X ltoggleDTR(0L); X X sync_Telebit(); X X /* X * set to factory default (bless them for this command) X * and a few initial beachhead values X */ X for(itmp = 0; itmp < maxretry; itmp++) X { X lwrite("AT&FE0F1M0Q4V1X3\r"); X if(lread(2) == rOk) X break; X } X if(itmp == maxretry) X { X DEBUG(1,"INIT FAILED (init0)\n",0); X myexit(RC_FAIL | RCE_TIMOUT); X } X X /* X * send initialization string 1 X */ X for(itmp = 0; itmp < maxretry; itmp++) X { X lwrite(init1); X if(lread(2) == rOk) X break; X } X if(itmp == maxretry) X { X DEBUG(1,"INIT FAILED (init1)\n",0); X myexit(RC_FAIL | RCE_TIMOUT); X } X X /* X * send initialization string 2 X */ X for(itmp = 0; itmp < maxretry; itmp++) X { X lwrite(init2); X if(lread(2) == rOk) X break; X } X if(itmp == maxretry) X { X DEBUG(1,"INIT FAILED (init2)\n",0); X myexit(RC_FAIL | RCE_TIMOUT); X } X X} /* end of init_T2500 */ X X/*+------------------------------------------------------------------------- X DCE_hangup() - issue hangup command to DCE X XThis function should do whatever is necessary to ensure X1) any active connection is terminated X2) the DCE is ready to receive an incoming call if DTR is asserted X3) the DCE will not accept an incoming call if DTR is false X XThe function should return when done. X XAny necessary switch setting or other configuration necessary for this Xfunction to succeed should be documented at the top of the module. X--------------------------------------------------------------------------*/ Xvoid XDCE_hangup() X{ X#ifdef TRUSTING X DEBUG(7,"RESETING %s\n",dce_name); X ltoggle_DTR(0L); X lwrite("ATZ\r"); X (void)lread_ignore(1); X#else /* !TRUSTING */ X init_T2500(); X#endif X X} /* end of DCE_hangup */ X X/*+------------------------------------------------------------------------- X DCE_dial(telno) - dial a remote DCE X XThis function should connect to the remote DCE and use any success Xindication to modify the tty baud rate if necessary before returning. X XUpon successful connection, return 0. X XUpon unsuccessful connection, return RC_FAIL or'd with an appropriate XRCE_XXX value from dialer.h. X Xlwrite() is used to write to the DCE. X Xlread() and lread_ignore() are used to read from the DCE. Read timeouts Xfrom calling lread() will result automatically in the proper error Xtermination of the program. Read timeouts from calling lread_ignore() Xreturn -1; you handle the execption here. X XAny necessary coding of phone numbers, switch settings or other Xconfiguration necessary for this function to succeed should be Xdocumented at the top of the module. X XT2500-specific comments: X S0=0 dont allow connect while dialing X S54=3 pass BREAK signal to remote modem X S64=0 abort dialing if characters sent by DTE X S66=1 lock the interface speed X S110=0 disable data compression unless requested otherwise X--------------------------------------------------------------------------*/ Xint XDCE_dial(telno) Xchar *telno; X{ Xchar cmd[128]; Xchar phone[50]; Xint s50_set = 0; Xint s111_set = 0; Xint timeout; Xint result; Xint rrings = 0; Xlong then; Xlong now; Xchar *cptr; Xchar *dialout_default = "ATS0=0S7=40S54=3S64=0S66=1S110=0\r"; X#define MDVALID "0123456789CcEeFfKkMmNnPpRrSsUuWwXxVv*#,!/()-" X X/* preliminary setup */ X translate("=,-,",telno); X if(strspn(telno,MDVALID) != strlen(telno)) X { X DEBUG(1,"phone number has invalid characters\n",0); X return(RC_FAIL | RCE_PHNO); X } X if(decode_phone_number(telno,phone,sizeof(phone))) X { X DEBUG(1,"phone number too long\n",0); X return(RC_FAIL | RCE_PHNO); X } X X/* walk through dialer codes, doing custom setup */ X strcpy(cmd,"AT"); X cptr = cmd + strlen(cmd); X if(dialer_codes['C' - 'A']) X { X DEBUG(5,"COMPRESSION requested\n",0); X strcat(cmd,"S110=1"); X } X if(dialer_codes['E' - 'A']) X { X DEBUG(5,"ECHO SUPPRESSION requested\n",0); X strcat(cmd,"S121=1"); X } X if(dialer_codes['F' - 'A']) X { X DEBUG(5,"XON/XOFF FLOW CONTROL requested\n",0); X strcat(cmd,"S58=3"); X } X if(dialer_codes['K' - 'A']) X { X DEBUG(5,"KERMIT requested\n",0); X strcat(cmd,"S111=10"); X s111_set++; X } X if(dialer_codes['X' - 'A']) X { X DEBUG(5,"XMODEM requested\n",0); X strcat(cmd,"S111=20"); X s111_set++; X } X if(dialer_codes['U' - 'A']) X { X DEBUG(5,"UUCP requested\n",0); X strcat(cmd,"S111=30"); X s111_set++; X } X if(dialer_codes['M' - 'A']) X { X DEBUG(5,"MNP requested\n",0); X strcat(cmd,"S95=1"); X } X X if(dialer_codes['V' - 'A']) X { X DEBUG(5,"V.32 requested\n",0); X if(hiCBAUD != B9600) X { X DEBUG(1,"V.32 baud rate not 9600\n",0); X return(RC_FAIL | RCE_SPEED); X } X if((dialer_codes['P' - 'A']) || s111_set) X { X DEBUG(1,"both PEP and V.32 requested\n",0); X return(RC_FAIL | RCE_ARGS); X } X strcat(cmd,"S50=6"); X } X X if((dialer_codes['P' - 'A']) || s111_set || X ((hiCBAUD >= B9600) && (!dialer_codes['V' - 'A']))) X { X if(hiCBAUD < B9600) X { X DEBUG(1,"baud rate not high enough for PEP\n",0); X return(RC_FAIL | RCE_SPEED); X } X if(dialer_codes['P' - 'A']) X DEBUG(5,"PEP requested\n",0); X else X DEBUG(5,"PEP inferred: speed >= 9600 and no V.32 requested\n",0); X X dialer_codes['P' - 'A'] = 1; X strcat(cmd,"S50=255"); X } X X#ifndef TRUSTING X init_T2500(); X#endif X X DEBUG(6,"--> issuing default setup command\n",0); X sync_Telebit(); X lwrite(dialout_default); X if(lread(2) != rOk) X { X DEBUG(1,"default dialout setup failed\n",0); X return(RC_FAIL | RCE_NULL); X } X X/* issue the custom setup command */ X if(*cptr) X { X DEBUG(5,"--> issuing custom setup cmd\n",0); X strcat(cmd,"\r"); X sync_Telebit(); X lwrite(cmd); X if(lread(2) != rOk) X { X DEBUG(1,"custom modem setup failed\n",0); X return(RC_FAIL | RCE_NULL); X } X } X X/* X * calculate a timeout for the connect X * allow a minimum of 40 seconds, but if V.32 or PEP, 90 X * also if long distance (North American calculation here) X * make it 132 (S7 is calculated as timeout * .9) X */ X timeout = 40; X if((phone[0] == '1') && (phone[0] != '0')) X timeout = 132; X if((timeout < 90) && (dialer_codes['V' - 'A'] || dialer_codes['P' - 'A'])) X timeout = 90; X for(cptr = phone; cptr = strchr(cptr,','); cptr++) X timeout += 2; /* add extra time for pause characters */ X DEBUG(6,"timeout waiting for connect = %d seconds\n",timeout); X X/* indicate non-root should not see DTE->DCE traffic */ X secure = 1; X X/* X * build and issue the actual dialing command X * if root, let him see number, otherwise just say "remote system" X */ X DEBUG(1,"--> dialing %s\n", (uid) ? "remote system" : telno); X#ifdef WHT X if(!strncmp(*gargv,"ECU",3)) X dialer_codes['S' - 'A'] = 1; X#endif X sprintf(cmd,"ATM%dS7=%dDT%s\r", X ((dialer_codes['S' - 'A']) && !(dialer_codes['N' - 'A'])) ? 1 : 0, X (timeout * 9) / 10, X phone); X X /* cmd string can only be 80 characters including "AT" */ X if(strlen(cmd) > 80) X { X DEBUG(1,"phone number string too long\n",0); X cleanup(RC_FAIL | RCE_PHNO); X } X X sync_Telebit(); X lwrite(cmd); X X/* indicate non-root can see DTE->DCE traffic */ X secure = 0; X X/* wait for connect */ XWAIT_FOR_CONNECT: X time(&then); X result = lread(timeout); X if(!(result & rfConnect)) X { X switch(result & rfMASK) X { X case rNoCarrier: X return(RC_FAIL | ((rrings > 2) ? RCE_ANSWER : RCE_NOTONE)); X case rNoDialTone: X return(RC_FAIL | RCE_NOTONE); X case rBusy: X return(RC_FAIL | RCE_BUSY); X case rNoAnswer: X return(RC_FAIL | RCE_ANSWER); X case rRring: X if(rrings++ > 7) X return(RC_FAIL | RCE_ANSWER); X time(&now); X if((timeout -= ((int)(then - now))) > 0) X goto WAIT_FOR_CONNECT; X case rError: X default: X return(RC_FAIL | RCE_NULL); X } X } X X return(0); /* succeeded */ X X} /* end of DCE_dial */ X X/********************************************************** X* You probably do not need to modify the code below here * X**********************************************************/ X X/*+------------------------------------------------------------------------- X DCE_abort(sig) - dial attempt aborted X X sig = 0 if non-signal abort (read timeout, most likely) X != 0 if non-SIGALRM signal caught X X extern int dialing set 1 if dialing request was active, X else 0 if hangup request was active X XThis is a chance for the DCE-specific code to do anything it Xneeds to cl,ean up after a failure. Note that if a dialing Xcall fails, it is the responsibility of the higher-level Xprogram calling the dialer to call it again with a hangup request, so Xthis function is usually a no-op. X--------------------------------------------------------------------------*/ Xvoid XDCE_abort(sig) Xint sig; X{ X DEBUG(10,"DCE_abort(%d);\n",sig); X} /* end of DCE_abort */ X X/*+------------------------------------------------------------------------- X DCE_exit(exitcode) - "last chance for gas" in this incarnation X XThe independent portion of the dialer program calls this routine in Xlieu of exit() in every case except one (see DCE_argv_hook() below). XNormally, this function just passes it's argument to exit(), but Xany necessary post-processing can be done. The function must, Xhowever, eventually call exit(exitcode); X--------------------------------------------------------------------------*/ Xvoid XDCE_exit(exitcode) Xint exitcode; X{ X DEBUG(10,"DCE_exit(%d);\n",exitcode); X exit(exitcode); X} /* end of DCE_exit */ X X/*+------------------------------------------------------------------------- X DCE_argv_hook(argc,argv,optind,unrecognized_switches) X XThis hook gives DCE-specific code a chance to look over the entire Xcommand line, such as for -z Telebit processing. X Xargc andf argv are the same values passed to main(), X Xoptind is the value of optind at the end of normal getopt processing. X Xunrecognized_switches is the count of switches not handled by main(). XSpecifically, -h and -x are standard switches. X XNormally, this function should just return RC_FAIL|RCE_ARGS if there are Xany unrecognized switches, otherwise zero. If you keep your nose clean Xthough, you can do anything you need to do here and exit the program. X XNote: only simple switches (with no argument) may be used with this Xfacility if the functrion is to return,' since main()'s getopt() will Xstop processing switches if it runs into an unrecognized switch with an Xargument. X XIf the function returns a non-zero value, then the value will be passed XDIRECTLY to exit() with no further ado. Thus, a non-zero value must be Xof the format expected by dialer program callers, with RC_FAIL set as a Xminimum. X--------------------------------------------------------------------------*/ Xint XDCE_argv_hook(argc,argv,optind,unrecognized_switches) Xint argc; Xchar **argv; Xint optind; Xint unrecognized_switches; X{ X if(unrecognized_switches) X return(RC_FAIL | RCE_ARGS); X return(0); X} /* end of DCE_argv_hook */ X X/* vi: set tabstop=4 shiftwidth=4: */ SHAR_EOF $TOUCH -am 1224175590 'gendial/dceT2500.c' && chmod 0644 gendial/dceT2500.c || echo 'restore of gendial/dceT2500.c failed' Wc_c="`wc -c < 'gendial/dceT2500.c'`" test 18448 -eq "$Wc_c" || echo 'gendial/dceT2500.c: original size 18448, current size' "$Wc_c" true || echo 'restore of gendial/template.c failed' echo End of part 25, continue with part 26 exit 0 -------------------------------------------------------------------- Warren Tucker, TuckerWare emory!n4hgf!wht or wht@n4hgf.Mt-Park.GA.US Hacker Extraordinaire d' async PADs, pods, proteins and protocols exit 0 # Just in case... -- Kent Landfield INTERNET: kent@sparky.IMD.Sterling.COM Sterling Software, IMD UUCP: uunet!sparky!kent Phone: (402) 291-8300 FAX: (402) 291-4362 Please send comp.sources.misc-related mail to kent@uunet.uu.net.